Ip Ospf Hello-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip ospf hello-interval

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip ospf hello-interval helloInterval
no ip ospf hello-interval
Command introduced before JunosE Release 7.1.0.
Specifies the interval between hello packets that the router sends on the interface. The
no version resets the hello interval to its default.
helloInterval—Number in the range 1–65535 seconds; default value is 10 seconds
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
881