Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual page 540

Software for e series broadband services routers command reference a to m
Table of Contents

Advertisement

JunosE 11.3.x Command Reference Guide A to M
Mode
496
out-label—MPLS label for the route; the label with outgoing MPLS frames
peer—IP address of BGP peer from which route was learned
peer-type—Type of BGP peer: internal, external, or confederation
origin—Origin of the route
originator-id—Router ID of the router in the local AS that originated the route
rd—Route distinguisher
safi—Subsequent address family identifier
stale—Route that has gone stale due to peer restart
unknown-types—Attribute codes for unknown path attributes
weight—Weight of the route
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Router Configuration
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Junose 11.3

Table of Contents