Monitor Vlan Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

monitor vlan interface

Syntax
Release Information
Description
Options
Mode
1326
monitor vlan interface interfaceType interfaceSpecifier
[ interfaceType interfaceSpecifier ]* [ load-interval seconds ] [ display-time-of-day ]
Command introduced before JunosE Release 7.1.0.
Displays bit rate and packet rate statistics over a specified time interval for one or more
VLAN subinterfaces. There is no no version.
interfaceType—One of the following interface types listed in Interface Types and
Specifiers on page 5
atm
fastEthernet
gigabitEthernet
lag
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
seconds—Number of seconds in the range 5–30 that specifies the time interval at
which the router calculates bit rates and packet rates for the specified VLAN; default
value is 5 seconds
display-time-of-day—Sets time at which the router calculates the bit rate and packet
rate statistics for the current interval
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.