Table of Contents
Advertisement
mirror analyzer-ip-address
Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
mirror analyzer-ip-address analyzerIpAddress analyzer-virtual-router vrName
[ analyzer-udp-port udpPort [ mirror-identifier mirrorId
[ session-identifier sessionId ] ] ]
no mirror
Command introduced before JunosE Release 7.1.0.
Configures the mirror action for a classifier group in a secure IP or L2TP policy list. The
no version deletes the mirror rule.
analyzerIpAddress—IP address of the analyzer
vrName—Name of the virtual router where the analyzer interface is configured
udpPort—UDP port of the analyzer; required for L2TP packet mirror rules
mirrorId—Mirror identifier
sessionId—Session identifier
Classifier-Group Configuration
Configuring CLI-Based Mirroring
Chapter 13: M Commands
1317
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 and is the answer not in the manual?