Ipsec Transform-Set - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ipsec transform-set

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ipsec transform-set transformSetName transform0
[ transform1 [ transform2 [ transform3 [ transform4 [ transform5 ] ] ] ] ]
no ipsec transform-set transformSetName
Command introduced before JunosE Release 7.1.0.
Creates a transform set. Transform sets used for manually configured tunnels can have
only one transform. Transform sets used for signaled tunnels can have up to six
transforms. Transforms are numbered in a priority sequence in the order in which you
enter them. Each transform provides a different combination of data authentication and
confidentiality. The no version deletes the transform set.
transformSetName—Name of the transform set
transform0 through transform5—AH or ESP transform; use the online Help to view
available transforms
Global Configuration
Chapter 10: I Commands
1005