mark-user-priority
Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] [ suspend ] mark-user-priority userPriorityValue
Command introduced before JunosE Release 7.1.0.
Defines a policy rule that specifies the value of the 802.1p VLAN user priority bits. The no
version removes the rule from the policy list; the suspend version temporarily suspends
the policy rule; the no suspend version resumes application of a suspended rule.
NOTE: This command replaces the Policy List Configuration version of the
mark-user-priority command, which may be removed completely in a future
release.
userPriorityValue—EXP bit value assigned to packets; number in the range 0–7
Classifier List Configuration
Policy Rule Precedence
Chapter 13: M Commands
1265