Ipsec Lifetime - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipsec lifetime

Syntax
Release Information
Description
Options
Mode
1000
[ no ] ipsec lifetime { kilobytes kilobytes | seconds seconds }
Command introduced before JunosE Release 7.1.0.
Specifies the default lifetime in volume of traffic or seconds. The default lifetime applies
to secure tunnels that do not have a tunnel lifetime defined. When either the volume of
traffic or number of seconds limit is reached, IPSec renegotiates the SA. The no version
restores the default values.
kilobytes—Volume of traffic in kilobytes that can pass between IPSec peers before the
SA expires; in the range 102400–4294967295; default value is 4294967295 kilobytes;
a setting of zero turns off the kilobyte lifetime
seconds—Number of seconds an SA lives before expiring; in the range
7200–4294967295; default value is 28800 seconds (8 hours)
Global Configuration
Copyright © 2010, Juniper Networks, Inc.