L2C Ip Listen - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

l2c ip listen

Syntax
Release Information
Description
Mode
1146
[ no ] l2c ip listen
Command introduced before JunosE Release 7.1.0.
Creates a listening TCP socket at the virtual router within the ANCP context. ANCP needs
TCP sockets so that neighbors can open GSMP sessions. The no version removes the
listening TCP socket and stops any new sessions from being established. The no version
does not terminate any existing GSMP sessions.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.