Mirror Trap-Enable - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mirror trap-enable

Syntax
Release Information
Description
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] mirror trap-enable
Command introduced in JunosE Release 7.2.0.
Configures the packet mirroring application to generate secure packet mirroring traps.
The no version disables the trap generation.
Global Configuration
Monitoring SNMP Secure Packet Mirroring Traps
Chapter 13: M Commands
1321