Mpls Traffic-Eng Area - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls traffic-eng area

Syntax
Release Information
Description
Options
Mode
1420
[ no ] mpls traffic-eng area { areaId | areaIdInt }
Command introduced before JunosE Release 7.1.0.
Enables flooding of MPLS traffic-engineering link information into the specified OSPF
area. Flooding is disabled by default. The no version disables flooding.
areaId—OSPF area ID in IP address format
areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
Router Configuration
Copyright © 2010, Juniper Networks, Inc.