Load-Rebalance - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

load-rebalance

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1226
[ no ] load-rebalance [ period rebalancePeriod start-threshold rebalanceStartThreshold
[ percent | subscribers ] stop-threshold rebalanceStopThreshold
[ percent | subscribers ] maximum-improvement rebalanceMaximumImprovement
[ percent | subscribers ] ]
Command introduced in JunosE Release 8.1.0.
Configures the QoS algorithm for rebalancing the links in an 802.3ad link aggregation
group (LAG). To configure the algorithm to dynamically rebalance the LAG using existing
parameters, issue the load-rebalance command without any keywords. The no version
restores the default parameters.
rebalancePeriod—Time period for rebalancing in seconds; in the range 0–86400; the
default is 60 seconds
rebalanceStartThreshold—Amount of imbalance in the LAG that triggers the algorithm
to start rebalancing; the default is 0 percent
percent—Specifies that the threshold is measured as a percentage of the average
load per link; in the range 0–100
subscribers—Specifies that the threshold is measured by the number of subscribers
away from the average subscriber count per link in the LAG; in the range 0–100000
rebalanceStopThreshold—Amount of imbalance in the LAG that triggers the algorithm
to stop rebalancing; the default is 0 percent
percent—Specifies that the amount of imbalance is measured as a percentage of
the average load per link; in the range 0–100
subscribers—Specifies that the threshold is measured by the number of subscribers
away from the average subscriber count link in the LAG; in the range 0–100000
rebalanceMaximumImprovement—Maximum number of links in the LAG to rebalance;
the default is 100 percent
percent—Specifies that the maximum number of links is measured as a percentage
of the total links; in the range 0–100
subscribers—Specifies that the maximum number of links is measured by the number
of subscribers; in the range 0–100000
Interface Configuration
Configuring Load Rebalancing for 802.3ad Link Aggregation Groups
Copyright © 2010, Juniper Networks, Inc.