Mpls Statistics Next-Hop - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls statistics next-hop

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] mpls statistics next-hop nextHopIndex
Command introduced in JunosE Release 7.1.0.
Enables statistics collection for MPLS next hops. By default, statistics are enabled for
next hops depending on the protocol that created the MPLS next hop. Statistics are not
stored in NVS. The no version disables statistics collection.
nextHopIndex—Integer uniquely identifying a next hop; in the range 1–1048575
Global Configuration
Chapter 13: M Commands
1413