Ipv6 Mld Robustness - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 mld robustness

Syntax
Release Information
Description
Options
Mode
1046
ipv6 mld robustness numberOfMessages
no ipv6 mld robustness
Command introduced before JunosE Release 7.1.0.
Specifies the number of times that the router sends MLD group-specific queries before
declaring a group to no longer have any members on an interface. The no version restores
the default value, 2.
numberOfMessages—Number of times that the router sends MLD group-specific queries
in the range 1–4
Interface Configuration, Profile Configuration
Copyright © 2010, Juniper Networks, Inc.