Ip Igmp Static-Exclude - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip igmp static-exclude

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip igmp static-exclude sourceAddress groupAddress
Command introduced before JunosE Release 7.1.0.
Specifies that an interface not handle multicast traffic for one or more (S,G) combinations.
The no version removes the (S,G) exclusion from the interface.
sourceAddress—Address of the source
groupAddress—Address of the group
Interface Configuration, Profile Configuration
Chapter 10: I Commands
831