Description - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

description

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
description name
no description
Command introduced before JunosE Release 7.1.0.
In Controller Configuration mode, assigns a text description or an alias to a CT3, E3, T3,
or SONET/SDH interface. Use the show controllers e3, show controllers sonet, show
controllers t1, or mpls rsvp disable command to display the description. The no version
removes the description or alias.
In VRF Configuration mode, assigns a text description or an alias to the VRF. The no
version removes the description or alias.
NOTE: In Interface Configuration mode, this command has been replaced
by the ip description command for assigning a description to a static IP
interface. This command may be removed completely from Interface
Configuration mode in a future release.
name—Text string or alias of up to 256 characters (in Interface Configuration mode)
or up to 80 characters (in Controller Configuration mode and VRF Configuration mode)
Controller Configuration, Interface Configuration, VRF Configuration
Chapter 5: D Commands
505