Mpls Lsp Retry-Time - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls lsp retry-time

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls lsp retry-time retryTime
no mpls lsp retry-time
Command introduced before JunosE Release 7.1.0.
Specifies the interval in seconds between attempts to set up an LSP for RSVP-TE after
a failure other than one due to no available route. The no version restores the default
value, 5 seconds.
retryTime—Interval in the range 1–60
Global Configuration
Chapter 13: M Commands
1379