Mpls Match Traffic-Class - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls match traffic-class

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls match traffic-class className color { green | yellow | red } set exp-bits bitValue
no mpls match traffic-class className color { green | yellow | red }
Command introduced before JunosE Release 7.1.0.
Sets the EXP bits in the MPLS shim header of outgoing MPLS packets that match the
specified combination of traffic class and color. The no version reverts to the default
behavior for traffic matching the specified traffic class and color combination. The default
behavior sets the EXP bits to 000 for traffic entering an LSP and has no effect on the
EXP bits for transit traffic.
className—Name of a traffic class; the router supports up to eight traffic classes
green—Sets packet color to green, indicating a low drop preference
yellow—Sets packet color to yellow, indicating a medium drop preference
red—Sets packet color to red, indicating a high drop preference
bitValue—Value in the range 0–7 that sets the corresponding binary value (000–111)
for the three EXP bits
Global Configuration
Chapter 13: M Commands
1381