Max-Discovery-Table-Entries - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

max-discovery-table-entries

Syntax
Release Information
Description
Options
Mode
1288
max-discovery-table-entries maxEntries
no max-discovery-table-entries
Command introduced in JunosE Release 7.2.0.
Specifies the maximum number of discovery table entries the ANCP neighbor can have.
The no version returns the maximum number of table entries to its default value, 10,000
entries.
maxEntries—Maximum number of discovery table entries allowed for the ANCP neighbor
in the range 1–64000
L2C Neighbor Configuration
Copyright © 2010, Juniper Networks, Inc.