Dead-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

dead-interval

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
dead-interval deadInterval
no dead-interval
Command introduced before JunosE Release 7.1.0.
Sets the time period that the OSPF router waits without seeing hello packets from a
remote neighbor before declaring the neighbor to be down. The no version restores the
default value.
deadInterval—Number in the range 1–65535 seconds; default value is 40 seconds
Remote Neighbor Configuration
Chapter 5: D Commands
473