Memory - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

memory

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] memory warning highUtilization abatedUtilization
Command introduced before JunosE Release 7.1.0.
Configures memory warning parameters. When the router reaches the high memory
utilization value, it sends warning messages. When memory usage falls to the abated
memory utilization value, the router stops sending warning messages. The no version
returns the memory warning parameters to the default values.
highUtilization—High memory utilization value; in the range 1–99; default value is 85
abatedUtilization—Abated memory utilization value; in the range 1–99; default value
is 75
Global Configuration
Chapter 13: M Commands
1307