Mdt-Data-Holddown - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mdt-data-holddown

Syntax
Release Information
Description
Options
Mode
1300
mdt-data-holddown timeout
no mdt-data-holddown
Command introduced in JunosE Release 8.2.0.
Configures the time in seconds before switching back to the default MDT group from the
data MDT group. The no version returns to the default.
timeout—Time before switching back to the default MDT group, in the range 1–300
seconds; the default is 60
IP PIM Data MDT Configuration
Copyright © 2010, Juniper Networks, Inc.