Ip Source-Route - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip source-route

Syntax
Release Information
Description
Options
Mode
944
[ no ] ip source-route [ vrf vrfName ]
Command introduced before JunosE Release 7.1.0.
Enables the forwarding of source-routed packets in a VR or VRF. The no version disables
forwarding. Forwarding is disabled by default in all VRs.
vrfName—Name of the VRF; string of 1–32 alphanumeric characters
Global Configuration
Copyright © 2010, Juniper Networks, Inc.