Distribute-List - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

distribute-list

Syntax
Release Information
Description
Options
Mode
528
In Router Configuration mode:
[ no ] distribute-list accessListName { in | out } [ interfaceType interfaceSpecifier ]
In Remote Neighbor Configuration mode:
[ no ] distribute-list accessListName { in | out }
Command introduced before JunosE Release 7.1.0.
Specifies the distribute list, an access list applied to incoming or outgoing RIP route
updates. In Remote Neighbor Configuration mode, applies only to a RIP remote-neighbor
interface. The no version removes the distribute list. An IP access list acts as a filter; refer
to the access-list command for details.
accessListName—Name of the access list; string of up to 32 alphanumeric characters
in—Applies the access list to incoming route updates
out—Applies the access list to outgoing route updates
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Address Family Configuration, Remote Neighbor Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.