Ipv6 Nd Dad Attempts - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 nd dad attempts

Syntax
Release Information
Description
Options
Mode
1062
ipv6 nd dad attempts numberOfAttempts
no ipv6 nd dad attempts
Command introduced before JunosE Release 7.1.0.
Specifies the number of consecutive neighbor solicitation messages that an interface
sends while the router performs duplicate address detection (DAD) on the unicast IPv6
addresses of the interface. The no version returns the number of neighbor solicitation
messages to its default value (one message without any follow-up messages).
numberOfAttempts—Number of neighbor solicitation messages that you want the
router to transmit
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.