Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual page 1360

JunosE 11.3.x Command Reference Guide A to M
Mode
Related
Documentation
1316
calling-station-id—Calling-Station-Id, RADIUS attribute [31]
dhcp-option-82—DHCP Option 82, RADIUS attribute [26–159], Vendor ID 4874
ip-address—Framed-IP-Address, RADIUS attribute [8]; associated with the virtual
router where the command is issued, RADIUS VSA [26-1]
nas-port-id—NAS-Port-Id, RADIUS attribute [87]
username—User-Name, RADIUS attribute [1]; associated with the virtual router
where the command is issued, RADIUS VSA [26-1]
triggerValue—Value of the triggerType (the specified RADIUS attribute) that identifies
the subscriber
ip—Configures mirroring for an IP subscriber
ipv6—Configures mirroring for an IPv6 subscriber
l2tp—Configures mirroring for an L2TP subscriber
policyName—Secure policy to attach to the subscriber's interface
Global Configuration
Configuring CLI-Based Mirroring
Copyright © 2010, Juniper Networks, Inc.