Ipv6 Virtual-Router - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 virtual-router

Syntax
Release Information
Description
Options
Mode
1116
[ no ] ipv6 virtual-router vrName
Command introduced before JunosE Release 7.1.0.
Specifies a virtual router in an IPv6 profile. Dynamic interfaces created with the profile
are assigned to this VR. The no version removes the VR from the profile; if a VR is not
specified via RADIUS, then any subsequent creation process for dynamic interfaces using
the profile fails.
vrName—Name of the virtual router; a string of 1–15 alphanumeric characters
Profile Configuration
Copyright © 2010, Juniper Networks, Inc.