Ipv6 Nd Suppress-Ra-Source-Link-Layer - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 nd suppress-ra-source-link-layer

Syntax
Release Information
Description
Mode
1072
[ no ] ipv6 nd suppress-ra-source-link-layer
Command introduced before JunosE Release 7.1.0.
Suppresses the source link-layer option in IPv6 router advertisement transmissions. This
action forces neighbors to solicit the router link layer explicitly, and may prove necessary
when enabling inbound load sharing across multiple link-layer addresses. The no version
reenables the sending of the source link-layer option in IPv6 router advertisement
transmissions.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.