Mpls Disable - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls disable

Syntax
Release Information
Description
Mode
1340
[ no ] mpls disable
Command introduced before JunosE Release 7.1.0.
Administratively disables the MPLS major interface. MPLS major interfaces are
administratively enabled by default. The no version restores the default condition, and
creates an MPLS major interface if it does not already exist.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.