Local Ip Network - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

local ip network

Syntax
Release Information
Description
Options
Mode
1232
local ip network ipNetwork ipMask
no local ip network
Command introduced in JunosE Release 7.3.0.
Specifies networks that are reachable through the IPSec tunnel. You can configure up
to 16 networks for this method of " split-tunneling." The no version removes the specified
network from the reachable list.
ipNetwork—IP network reachable through the secure connection
ipMask—IPv4 subnetwork mask for the IP network
IPSec Tunnel Profile Configuration
Copyright © 2010, Juniper Networks, Inc.