Message-Digest-Key Md5 - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

message-digest-key md5

Syntax
Release Information
Description
Options
Mode
1308
message-digest-key keyID md5 [ 0 | 8 ] msgDigestKey
no message-digest-key keyID
Command introduced before JunosE Release 7.1.0.
Enables OSPF MD5 authentication for the remote-neighbor interface and configures the
MD5 key. The no version deletes an MD5 key.
NOTE: If all the MD5 keys have been deleted, the authentication type is still
MD5, but you need to configure MD5 keys.
To disable MD5 authentication for the remote-neighbor interface, use the
authentication-none command.
keyID—Key identifier in the range 1–255
md5—Specifies use of the MD5 algorithm
0—Indicates the msgDigestKey is entered in unencrypted form (plaintext); this is the
default option
8—Indicates the msgDigestKey is entered in encrypted form (ciphertext)
msgDigestKey—OSPF password; string of up to 16 alphanumeric characters
Remote Neighbor Configuration
Copyright © 2010, Juniper Networks, Inc.