Issuer-Identifier - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

issuer-identifier

Syntax
Release Information
Description
Options
Mode
1134
issuer-identifier name
no issuer-identifier
Command introduced before JunosE Release 7.1.0.
Specifies the name of the CA issuer for online digital certificate configuration. In CA
authentication requests, the identifier is used together with the enrollment URL specified
by the enrollment url command. The no version removes the name from the configuration.
name—Name of CA issuer; in the range 1–200 characters
IPSec CA Identity Configuration
Copyright © 2010, Juniper Networks, Inc.