Link Selection - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

link selection

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
link selection { primary | secondary }
no link selection
Command introduced before JunosE Release 7.1.0.
Disables redundancy on a GE I/O module by allowing operation on the specified port
only. The no version restores the default situation, in which port redundancy is enabled.
primary—Allows operation on only the primary port
secondary—Allows operation on only the redundant port
Interface Configuration
Chapter 12: L Commands
1223