Mpls Ldp Session Retries - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls ldp session retries

Syntax
Release Information
Description
Options
Mode
1366
mpls ldp session retries retryNum
no mpls ldp session retries
Command introduced before JunosE Release 7.1.0.
Specifies the number of attempts that will be made to set up an LDP session. The no
version restores the default value, 0, meaning that the attempts will be made until
successful.
retryNum—Number of attempts in the range 0–65535
Global Configuration
Copyright © 2010, Juniper Networks, Inc.