Ike Local-Identity - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ike local-identity

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ike local-identity { ip address ipAddress | username userName | domain-name
domainName }
no ike local-identity
Command introduced in JunosE Release 7.3.0.
Sets the local IKE identity used for IKE security association (SA) negotiations. The no
version removes the local IKE identity.
ipAddress—IP address in 32-bit dotted decimal format (for example, 192.56.32.2)
userName—Username used as the IKE local identity for IKE SA negotiations
domainName—Domain name used as the IKE local identity for IKE SA negotiations
(string of 1–32 characters)
IPSec Tunnel Profile Configuration
Chapter 10: I Commands
697