Igmp Promiscuous - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

igmp promiscuous

Syntax
Release Information
Description
Mode
694
[ no ] igmp promiscuous
Command introduced before JunosE Release 7.1.0.
Allows all IGMP interfaces on the router to accept IGMP reports from hosts on any subnet.
The no version allows IGMP interfaces on the router to accept IGMP reports only from
hosts on their associated subnets.
Router Configuration
Copyright © 2010, Juniper Networks, Inc.