Mpls Traffic-Eng Router-Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mpls traffic-eng router-id

Syntax
Release Information
Description
Options
Mode
1426
[ no ] mpls traffic-eng router-id interfaceType interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Specifies a stable interface to be used as a router ID for MPLS traffic engineering with
IS-IS or OSPF, typically a loopback interface. The interface acts as the destination node
for tunnels originating at other nodes. The no version removes the interface as a router
ID.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Router Configuration
Copyright © 2010, Juniper Networks, Inc.