Hello-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

hello-interval

Syntax
Release Information
Description
Options
Mode
682
hello-interval helloInterval
no hello-interval
Command introduced before JunosE Release 7.1.0.
Specifies the interval between hello packets that the router sends on the OSPF
remote-neighbor interface. The no version restores the default value.
helloInterval—Number in the range 1–65535 seconds; default value is 10 seconds
Remote Neighbor Configuration
Copyright © 2010, Juniper Networks, Inc.