Match Ip Next-Hop - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

match ip next-hop

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
match ip next-hop { accessListName [ accessListName ]* |
prefix-list prefixListName [ prefixListName ]* | prefix-tree treeName [ treeName ]* }
no match ip next-hop [ accessListNumber ]* | prefix-list [ listName ]* |
prefix-tree [ treeName ]*
Command introduced before JunosE Release 7.1.0.
Matches any routes that have a next-hop router address passed by the specified access
list, prefix list, or prefix tree. You cannot mix references in the same match command;
you can only specify either access list(s), prefix list(s), or prefix tree(s). The no version
removes the match clause from a route map unless you specify a value, in which case
only that value is removed from the match clause.
accessListName—Name of a single standard access list; string of up to 32 characters
prefixListName—Name of a single prefix list; string of up to 32 characters
treeName—Name of a single prefix tree; string of up to 32 characters
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Policy List Configuration, Route Map Configuration
Chapter 13: M Commands
1275