Ip Ospf Transmit-Delay - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip ospf transmit-delay

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip ospf transmit-delay transmDelay
no ip ospf transmit-delay
Command introduced before JunosE Release 7.1.0.
Sets the estimated time it takes to transmit a link-state update packet on the interface.
The no version restores the default value.
transmDelay—Link-state transmit delay, a number in the range 0–3600 seconds;
default value is 1 second
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
887