Ip Extcommunity-List - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip extcommunity-list

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip extcommunity-list listName { permit | deny }
extendedCommunity [ extendedCommunity ]*
no ip extcommunity-list listName [ { permit | deny }
extendedCommunity [ extendedCommunity ]* ]
Command introduced before JunosE Release 7.1.0.
Defines an extended-community (extcommunity) list to be referenced in a route map.
The no version deletes the extcommunity.
listName—Name of the extended-community list
permit—Permits membership in the extended community for matching conditions
deny—Denies membership in the extended community for matching conditions
extendedCommunity—Extended community specified in the format:
{rt | soo } { ASN:nn | ipAddress:nn }
rt—Specifies a route-target community; consists of one or more routers that can
receive a set of routes advertised by BGP that carry the extended-community attribute
soo—Specifies a Site-of-Origin community; consists of one or more routers that
injects a set of routes into BGP that carry the extended-community attribute
ASN:nn—Identifies the extended community by a 16-bit autonomous system number
followed by a 32-bit integer
ipAddress:nn—Identifies the extended community identified by an IP address followed
by a 16-bit integer
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Global Configuration
Chapter 10: I Commands
791