Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual page 1260

JunosE 11.3.x Command Reference Guide A to M
Mode
1216
tunLowSeconds—Lower range of the lifetime in seconds; in the range 900–86400
seconds; default value is 3600
tunHighSeconds—Higher range of the lifetime in seconds; in the range 900–86400
seconds; default value is 86400
lowKilobytes—Lower range of the lifetime in kilobytes; in the range
100000–4294967295 KB; default value is 100000
highKilobytes—Higher range of the lifetime in kilobytes; in the range
100000–4294967295 KB; default value is 4294967295
IKE Policy Configuration, IPSec Transport Profile Configuration, IPSec Tunnel Profile
Configuration
Copyright © 2010, Juniper Networks, Inc.