Table of Contents
Advertisement
flash-disk initialize
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
flash-disk initialize [ no-format ] [ disk0 | disk1 ]
Command introduced before JunosE Release 7.1.0.
disk0 and disk1 keywords added in JunosE Release 7.2.0.
Privileged Exec mode added in JunosE Release 8.0.0.
Performs a low-level format of unmounted flash cards. There is no no version.
no-format—Erases all files but does not format the flash card
disk0—Specifies flash card in slot 0 of the SRP module; default value is disk0; available
only in Boot mode, because disk0 cannot be in an unmounted state in a router outside
of Boot mode
disk1—Specifies flash card in slot 1 of the SRP module; supported only on the E120
router and the E320 router
Boot, Privileged Exec
Chapter 7: F Commands
627
Advertisement
Table of Contents
