Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide A to M
mirror disable
Syntax
Release Information
Description
Options
1318
To disable mirroring for a specified trigger type:
mirror disable triggerType [hex] triggerValue
To disable mirroring for the agent-circuit-id or agent-remote-id trigger types, when the
hex variant is used:
mirror disable triggerType hex triggerValue
To disable mirroring for the dhcp-option-82 trigger type:
mirror disable dhcp-option-82 agent-circuit-id triggerValue1 agent-remote-id triggerValue2
To disable mirroring for the dhcp-option-82 trigger type, when the hex variant is used:
mirror disable dhcp-option-82 hex triggerValue
Command introduced before JunosE Release 7.1.0.
nas-port-id added in JunosE Release 7.1.0.
hex keyword added in JunosE Release 11.1.0.
Disables a packet mirroring session that was dynamically configured for a subscriber;
uses the trigger information to identify the subscriber's session. There is no no version.
NOTE: The hex variant is applicable only for agent-circuit-id, agent-remote-id,
and dhcp-option-82 trigger types. If the hex variant is used then the
triggerValue must be a hexadecimal number.
triggerType—One of the following RADIUS attributes that was used as the trigger to
start the packet mirroring session
acct-session-id—Acct-Session-Id, RADIUS attribute [44]
agent-circuit-id—Agent Circuit ID, RADIUS attribute [26–1], Vendor ID 3561
agent-remote-id—Agent Remote ID, RADIUS attribute [26–2], Vendor ID 3561
calling-station-id—Calling-Station-Id, RADIUS attribute [31]
dhcp-option-82—DHCP Option 82, RADIUS attribute [26–159], Vendor ID 4874
ip-address—Framed-IP-Address, RADIUS attribute [8]; associated with the virtual
router where the command is issued, RADIUS VSA [26-1]
nas-port-id—NAS-Port-Id, RADIUS attribute [87]
username—User-Name, RADIUS attribute [1]; associated with the virtual router
where the command is issued, RADIUS VSA [26-1]
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
