Ip Dvmrp Announce-Filter - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip dvmrp announce-filter

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip dvmrp announce-filter listName
no ip dvmrp announce-filter
Command introduced before JunosE Release 7.1.0.
Specifies a list of DVMRP routes that the router will advertise on an interface. The no
version restores the default situation, in which the router advertises all known routes on
the interface.
listName—Name of the IP access list that specifies the DVMRP routes that the router
will advertise on the interface. You can specify a simple or extended access list; with
an extended access list you can specify an address and a subnet mask.
Interface Configuration
Chapter 10: I Commands
781