Ip Icmp Update-Source - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip icmp update-source

Syntax
Release Information
Description
Options
Mode
810
ip icmp update-source [ vrf vrfName ] { interfaceType interfaceSpecifier | ipAddress }
no ip icmp update-source [ vrf vrfName ] [ interfaceType interfaceSpecifier
| ipAddress ]
Command introduced before JunosE Release 7.1.0.
Specifies a unique source address or interface for any ICMP messages that the E Series
router generates. The no version removes the unique source specification.
vrfName—Name of the VRF; string of 1–32 alphanumeric characters
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
ipAddress—IP address of an E Series interface over which you want to send ICMP
messages
Global Configuration
Copyright © 2010, Juniper Networks, Inc.