Table of Contents
Advertisement
isis mesh-group
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
isis mesh-group { blocked | number }
no isis mesh-group
Command introduced before JunosE Release 7.1.0.
Configures an interface in the same mesh group to act as a virtual multiaccess network.
The no version disables the feature.
blocked—Blocks reserved LSPs from being flooded out on this defined configured
interface
number—Mesh group number in the range 1–4294967295
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
1125
Advertisement
Table of Contents
