Mpls Ldp Session Keepalive Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

mpls ldp session keepalive interval

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls ldp session keepalive interval seconds
no mpls ldp session keepalive interval
Command introduced in JunosE Release 8.1.0.
Sets the transmission interval at which LDP sends session keepalive messages to maintain
the LDP session. Keepalive messages are sent to LDP peers at this interval in the absence
of any other LDP traffic over the session. This command takes effect immediately. The
no version restores the default interval, 20 seconds.
seconds—Number of seconds, in the range 1–65535
Global Configuration
Chapter 13: M Commands
1365