Ip Address Virtual-Router - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip address virtual-router

Syntax
Release Information
Description
Options
Mode
736
[ no ] ip address ipAddress virtual-router vrName
no ip address
Command introduced in JunosE Release 7.3.0.
Limits the scope of the IKE policy rule to the specified local IP address on the specified
virtual router. This limitation ensures that this policy rule is evaluated for IKE source
address evaluations for only the specified IP address and virtual router. The no version
removes IP address and virtual router limitation.
ipAddress—IP address in 32-bit dotted decimal format (for example, 192.56.32.2) to
which you want to limit this policy rule
vrName—Name of virtual router to which you want to limit this policy rule
IKE Policy Configuration
Copyright © 2010, Juniper Networks, Inc.