Mark - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

mark

Syntax
Release Information
Description
Options
1260
For IPv4:
[ no ] [ suspend ] mark { tosByteValue mask maskValue |
tos-precedence tosPrecNum | tos tosNum | dsfield dsFieldNum }
profile colorMarkProfileName }
For IPv6:
[ no ] [ suspend ] mark { tcByteValue mask tcMaskValue | tc-precedence
tcPrecNum | tcfield tcFieldNum | dsfield dsFieldNum } profile
colorMarkProfileName }
Command introduced before JunosE Release 7.1.0.
colorMarkProfileName variable added in JunosE Release 7.2.0.
Sets the precedence field of the ToS byte (for IPv4) or traffic class byte (for IPv6) in the
IP header to a specified value for packets that match the current classifier control list.
This command is not tied to a rate limit profile, but marks packets based on a classifier
control list. The no version removes the mark rule from the policy list; the suspend version
temporarily suspends the mark rule; the no suspend version resumes application of a
suspended rule.
NOTE: This command replaces the Policy List Configuration mode version
of the mark command, which may be removed completely in a future release.
tosByteValue—ToS byte value to be assigned to packets; in the range 0–255
maskValue—Mask to be used when applying ToS byte values to packets; in the range
1–255
tosPrecNum—ToS precedence value to be assigned to packets; in the range 0–7
tosNum—ToS value to be assigned to packets; in the range 0–255
dsFieldNum—DS field value to be assigned to packets; in the range 0–63
colorMarkProfileName—Name of the color-mark profile (up to 40 alphanumeric
characters)
tcByteValue—Traffic class field value to be assigned to packets; in the range 0–255
tcMaskValue—Mask to be used when applying traffic class field values to packets; in
the range 1–255
tcPrecNum—Traffic class field precedence value to be assigned to packets; in the range
0–7
tcFieldNum—Traffic class field value to be assigned to packets; in the range 0–255
Copyright © 2010, Juniper Networks, Inc.