Match Metric-Type - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

match metric-type

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
match metric-type { external | internal }
no match metric-type [ external | internal ]
Command introduced before JunosE Release 7.1.0.
Matches routes having the specified metric type. The no version removes the match
clause from a route map.
external—Specifies IS-IS external metric type
internal—Specifies IS-IS internal metric type
Policy List Configuration, Route Map Configuration
Chapter 13: M Commands
1281